Cold solvent road marking paint, also known as normal-temperature solvent-based marking paint, is a traditional and widely used liquid road marking material. It can be constructed at ambient temperature without heating equipment. With the advantages of simple construction, low comprehensive cost and fast drying speed, it is one of the most common pavement marking materials in road daily maintenance and low-traffic road construction.
| Item | Specification |
| Product Name | Room Temperature Solvent-Based Road Marking Paint |
| Brand | SANAISI |
| Type | Solvent-Based Liquid Road Marking Paint |
| Main Material | Acrylic Resin |
| Appearance | Liquid |
| Solid Content | 46% |
| Available Colors | White / Yellow / Green / Red / Blue |
| Net Weight | 25 Kg |
| Package | 25 Kg/barrel |
| Application Method | Spray / Manual Application |
| Main Advantage | Good Adhesion / Fast Drying |
| Touch / Full Dry Time | 7–10 Min At 23°C |
| Marking Line Warranty | 3–6 Months |
| Construction Temperature | Ambient Temperature |
| Heating Equipment | Not Required |
| Recommended Glass Beads | 75–250 Μm |
Normal temperature construction: No heating and melting required during construction, suitable for on-site operation in all seasons, no restriction by heating equipment, low construction threshold and strong environmental adaptability.
Fast surface drying: It can quickly volatilize solvent and form a film under natural conditions, effectively reducing road occupation time and traffic closure duration.
Good fluidity and leveling: The paint has moderate viscosity, uniform spraying effect, smooth marking surface, neat edges, and no bulging or grainy defects.
Low material and construction cost: Raw materials are cost-effective, and the construction does not need heating equipment and complex processes, with low labor and mechanical costs.
Convenient maintenance and renovation: Old solvent-based markings can be directly overcoated and renovated without large-area polishing and removal, which greatly improves the efficiency of road secondary marking.
1. Low-Grade Urban Roads
It is widely used for marking of urban branch roads, community internal roads, pedestrian streets and non-motor vehicle lanes. These roads have low vehicle flow, low driving speed and light load. The cold solvent paint can fully meet the marking identification demand, and its low cost and convenient construction are more in line with the daily maintenance budget of urban auxiliary roads.
2. Rural and Township Roads
Suitable for lane dividing lines, edge lines, warning lines and crosswalk markings of rural highways, township roads and village group connecting roads. Rural roads have low traffic volume and limited maintenance funds. Cold solvent marking paint can realize rapid marking construction at low cost and complete road traffic guidance and safety warning.
3. Temporary Marking & Emergency Maintenance
It is the preferred material for temporary traffic markings, including construction section temporary lane separation, temporary guiding lines, road closure warning lines and traffic diversion markings. With fast drying and quick opening to traffic, it is suitable for emergency road maintenance, traffic control during road construction, and temporary marking adjustment.
4. Functional Area Marking of Auxiliary Scenarios
Applicable for marking of parking lots, factory zones, campus roads, residential quarters, scenic area passages and other closed low-speed traffic sites. It is used for parking space lines, pedestrian passages, no-parking warning lines and functional area dividing lines, with clear marking effect and low later maintenance cost.
5. Daily Renovation and Supplementary Marking
Used for local fading, peeling and missing supplementary marking of old road markings. It can be directly constructed on the original old solvent-based marking layer, realizing rapid partial repair, avoiding overall road repainting, and saving construction time and engineering cost.
Cold solvent paint is matched with fine particle size glass beads (75–250μm). The fine beads are not easy to sink and fall off, which can form uniform retro-reflective effect on the thin paint film, ensuring the night visibility of conventional markings.
The paint can be applied at ambient temperature, removing the preheating stage required for thermoplastic powder. This helps simplify equipment preparation for maintenance crews and smaller marking projects.
Solvent evaporation allows the painted line to form a film quickly after application. Shorter drying periods help reduce lane occupation during repair, repainting and temporary traffic control work.
Moderate viscosity and leveling performance support relatively uniform spraying, clear line edges and a smoother marking surface.
No hot-melt kettle or heating process is required, which can reduce machinery preparation and simplify labor arrangements for smaller projects.
For compatible old solvent-based markings, faded or damaged sections can be recoated locally, helping reduce the need for complete line replacement.
For projects requiring nighttime retroreflection, this solvent-based coating can be matched with fine glass beads in the 75–250 μm range.
The smaller bead size is better suited to the thinner coating film formed by solvent paint. Proper surface distribution helps improve nighttime visibility while reducing excessive sinking into the wet layer.
| Requirement | Recommended Configuration |
|---|---|
| Daytime Guidance Only | Paint without surface beads |
| Night Visibility Required | Paint + 75–250 μm glass beads |
| Temporary Marking | Select based on project duration |
| Maintenance Repainting | Match existing road specification |
| Parking / Factory Areas | Reflection optional |
Yes, we can provide 5-10kg thermoplastic paint sample for free. However, shipping cost should be payed by customers.
Yes! We can provide samples for your test and customized samples are also available.
Yes! Our solar pavement marker can be ordered with any different combination of available color combinations for the reflector panel, L.E.D. light and aluminum alloy body. And can print your logo in the solar studs. The unit can be of steady flashing light model, with one side or double-sided illumination.
For our thermoplastic powder we don't have the MOQ requirement. One bag is available and can be sold. For the cold paint, one barrel is also can be sold.
We accept cash, TT, Western Union, Money Gram and so on .
We have enough stock for most products and can arrange shipment within 3 -5days once receiving your payment. As we export goods to the whole world, we can give you a reference for shipping time to some regions: Southeast Asian countries take 7- 10days; Middle East countries need 15-20 days; African countries need about 25-35 days; South American countries need about 30-35days; North American countries need 22-30 days; European countries need 30-40 days.
We can provide EXW, FOB, CIF service, etc. If other suppliers also have your goods to ship, you can transport the goods to our factory. We can load the goods for free.
Of course. We can customize your logo once we receive your order. And it needs about 10 days to print the new design bags after receiving your deposit.
