The SANAISI ABS Reflective Road Stud is a durable pavement reflector designed to improve lane visibility and road guidance on highways, urban roads, intersections, parking areas, tunnels, and other traffic safety applications.SANAISI supplies reflective road studs for road construction, traffic safety, infrastructure maintenance, and bulk project procurement, with different body and reflector color combinations available according to project requirements.
| Item | Specification |
| Product Name | ABS Reflective Road Stud |
| Model | SAS-RS01 |
| Body Material | ABS |
| Internal Filling | Epoxy Resin + Quartz Sand |
| Reflector Material | PMMA |
| Reflector Type | Single-Sided / Double-Sided |
| Photometric Value | More Than 600 Mcd/lux |
| Product Size | 100 × 100 × 18 Mm |
| Unit Weight | 180 G/pc |
| Expected Service Life | More Than 3 Years Under Normal Conditions |
Reflective studs water, oil, chemical and heat resistant
Reflective road studs can work more than 3 years normally
Very high reflectivity
Reflective road studs easy installation with glues
Photometric values: exceeds 600(mcd/lux)
Installed along lane boundaries and road edges to improve lane recognition and nighttime guidance.
Suitable for city roads, intersections, turning areas, and traffic channelization applications.
Reflective road studs provide visible reference points on curves, road shoulders, and areas where lane boundaries require stronger visual guidance.
Used for:
Lane guidance
Parking traffic direction
Entry and exit areas
Internal traffic management
Reflective surfaces help improve road boundary recognition where ambient lighting is limited.
Suitable for replacing damaged road reflectors or adding reflective guidance to existing infrastructure.
SANAISI provides product selection guidance, installation recommendations, and project application support for reflective road stud procurement.
Packing configuration, reflector direction, product color, and project quantity can be confirmed according to purchasing requirements.
Quality-related handling terms should follow the confirmed sales contract and project requirements.
The body is made from ABS, while the internal structure is filled with epoxy resin and quartz sand. The reflector is made from PMMA.
The standard size is:
100 × 100 × 18 mm
Yes. The product specification supports both single-sided and double-sided reflectors.
The supplied specification states photometric values exceeding 600 mcd/lux.
The product is designed for adhesive installation using suitable road glue.
The supplied specification states that it can normally work for more than three years. Actual service life depends on traffic load, climate, pavement condition, and installation quality.
The product specification lists ASTM D4280 and EN 1463-1.
Standard packing is 100 pcs/ctn, with a carton size of 56 × 22.5 × 22.2 cm.
